Advertisement
DMX CONTROL SUMMARY
Intensity
Flash intensity can be set from minimum (blackout) to maximum on 1-channel DMX
modes, channel 2 in 2-channel DMX modes and channel 1 in the 3- and 4-channel
DMX modes.
The maximum intensity can be reduced by selecting low power mode as described
Duration
Flash duration can be set from 0 to 650 ms on 50 Hz power supplies, or 0 to 530 ms
on 60 Hz power supplies, on channel 2 in the 3- and 4-channel DMX modes. Flash
duration is fixed in 1 channel DMX mode.
Rate
Flash rate can be set from 0 flashes per second to 17.5 flashes per second Hz on 50
Hz power supplies or from 0 to 20 flashes per second on 60 Hz power supplies, on
channel 3 in the 3- and 4-channel DMX modes. Flash rate is also controllable in 1-
and 2-channel DMX mode.
Built-in effects
Six programmed effects are available on channel 4 in the 4-channel DMX mode
only. The effects may be altered using the intensity, duration, and rate controls.
Ramp up: Light gradually increases in intensity, and then blacks out.
201-255
10 A
Random
Advertisement
