Advertisement
Pin 2 on the Mode DIP switch ON to choose BF-04D function.
The optional remote control for BF-04D provides the following:
Slider controls for chase speed and intensity.
Momentary push button control of the blinder effect, when the LED of
BLACK OUT is on, that means chase is stop.
Momentary push button for single flash and flash synchronization, when
the LED indicator of BLACK OUT is on, that means chase is stop.
Chase number toggle switch
Chase mode toggle switch: AUTO/SOUND
DATA CONNECTION
Important: Do not terminate the data link when using the BF-04D!
The remote controller connects to The LED-ST5000 with a 3-pin XLR data
cable. Additional LED-ST5000 may be connected in series, output to input.
Note, however, that the data link must not be terminated as described DMX
controllers and the LED-ST5000 should change to the remote control function.
OPERATION
Intensity
Flash intensity is controlled from 20% of the maximum Intensity to 100%
of the maximum Intensity with the DIMMER fader.
The maximum intensity is reduced in low power mode, which is selected
on pin 6 of the Mode DIP switch.
Chase Speed
Chase speed is controlled from slow to fast with the SPEED fader.
The BLACK OUT button toggles chase run on and off. The indicator diode
12 A
Advertisement
