Cleaning Mineral Deposits - Singer ES-850B Instruction Manual

Espresso-cappuccino machine
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1

CLEANING MINERAL DEPOSITS

1.
To make sure your coffee maker is operating effi ciently, internal piping
should be cleanly. To enjoy the peak fl avor of coffee, you should clean
away the mineral deposits left every 2-3 months.
2.
Fill the tank with water and descaler to the MAX level (the scale of water
and descaler is 4:1, the detail refers to the instruction of descaler. Please
use "household descaler" for cleaning espresso coffee makers.
3.
According to the program of pre-heating, put the metal funnel (no coffee
powder in it) and jug in place. Brewing water per "PRE-HEATING".
4.
Press the Power switch one time, its red lamp will be illuminated. Then
you should press the pump control switch, make sure the coffee/steam
selector is to the "
the pump. Wait for a moment, the coffee maker begins to be heated.
5.
When the lamp in pump control switch is illuminated, it shows the heating
is fi nished. Pressing the pump control switch to "
two cups coffee. Then close the pump and wait for 5s.
6.
Press the coffee/steam selector to the "
pump control switch will be extinguished, waiting until the indicator in the
coffee/steam selector is illuminated. Make steam for 2min by turning the
steam control knob, then turn the steam control knob to "o" position to
stop making steam. Press the Power switch to stop the unit immediately,
make the descalers deposit in the unit at least 15 minutes.
7.
Restart the unit and repeat the steps 4-6 at least 3 times.
8.
Then press the coffee/steam selector to "
control switch will be illuminated, then press the pump control switch to
"
" position to brew until no descaler is left.
9.
Then brewing coffee (no coffee powder) with tap water in the MAX level,
repeat the steps of 4-6 for 3 times (it is unnecessary to wait for 15 minutes
in step of 6), then brew until no water is left in the tank.
10. Repeat the step 9 at least 3 times to make sure the piping is clean.
" position, when there is water fl owing out and close
12
" position and make
" position, the indicator in the
" position, the lamp in pump
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents