How It Works Table of Contents Thank you for purchasing SureCall’s Fusion7 all-in-one cellular, Wi-Fi and HDTV signal booster. Fusion7 was Table of Contents specifically designed to eliminate frustrations over dropped calls, slow 4G data and limited Wi-Fi range, as well as,...
Standard Fusion7 signal booster packages include the following items: Ref. Description Image or Included in both standard kits 1/ea SureCall Fusion7 booster and power supply POWER SUPPLY Outdoor omni antenna (SC-288W) or or ...
Note: Due to the recent change of our company name from Cellphone-Mate (CM) to SureCall (SC) we have changed the prefix on all of our antennas, cables and acces- 1710-1755 MHz band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in these sories from CM to SC-.
Hardware Installation Hardware Installation SECTION 1: CELLULAR COMPONENT INSTALLATION Required distance between Outdoor/ Indoor Antenna Separation indoor & outdoor antennas A minimum of 50 ft. of separation between Step 1. Find the area with the Strongest Signal the outdoor antenna and indoor antennas is recommended for best performance.
Hardware Installation Hardware Installation Step 3. Install the Indoor Antennas Indoor antennas for the Fusion7 come with either four omni-directional domes or four directional panels. Outdoor Omni 4-Way Splitter • For indoor dome antennas, mount on a ceiling in a central location where signal is needed. Indoor Dome •...
Hardware Installation Hardware Installation Step 4. Install the Signal Booster For Each Indoor Panel Antenna: 1. Choose location for mounting antenna on vertical surface. Ideal height off the ground or floor should be the 1. When placing the booster, select a location close to a working AC outlet. Do not expose the signal booster to approximate height of regular cell phone use.
• Apply your settings and you will be prompted to reboot. • Wi-Fi: 23 dB Note: To access advanced settings for the internal router, contact SureCall at: 888-365-6283 and we will If any of the LEDs alternately blink red and yellow first try adding additional separation between the inside and outside antennas.
Check the green POWER LED on the signal booster. If it is OFF, return the power For kits using a DIRECTIONAL outside antenna, turn the antenna in short supply to SureCall. Contact tech support at to receive an RMA at: increments away from the signal source.
Note: Maximum Output Power: 1 Watt EIRP Due to the recent change of our company name from Cellphone-Mate (CM) to SureCall (SC) we have changed the prefix on all of our antennas, cables and accessories from CM to SC-. Cable:...
Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns T-Mobile: https://www.signalboosterregistration.com/ received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to Sprint: https://www.sprint.com/legal/fcc_boosters.html receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster.
Page 12
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
Need help?
Do you have a question about the Fusion 7 and is the answer not in the manual?
Questions and answers