SureCall Fusion2Go XR Quick Setup Manual

QUICK SETUP GUIDE
SureCall Fusion2Go
OVERVIEW
❹ ❹
❶
Outside
antenna

STEP 1. PLACE OUTSIDE ANTENNA

Place the magnetic-mount antenna on the top of your vehicle toward the back
to maximize the separation from the inside antenna.
Run the cable across the car's roof and into the car. To hide and protect the
antenna cable, carefully pull down the headliner, run cable underneath it and
push the seal back into place.
For non-magnetic vehicle body, use the adhesive option included in package.
Note: Ensure that the antenna has at least a 12-inch radius clear of obstructions
and other radiating elements, such as a radio antenna.

STEP 2. INSTALL INSIDE ANTENNA

❷ ❷
Identify a location for the inside antenna on or near your front dashboard that
is: (1) Within 2-3 feet of typical cell phone location, (2) At least 8 inches (20cm)
from cellular devices and (3) At least 4 inches (10cm) from metal.
Peel Velcro backing and apply to a clean dry surface in your chosen location.

STEP 3. PLACE BOOSTER AND CABLES

To Outside
Antenna
Select a well-ventilated location for the booster that is away from excessive
heat, direct sunlight, and moisture. We often suggest installing beneath a seat
or within the front console.
Connect the cable from the outside antenna to the connection marked
OUTSIDE and connect the cable from inside patch antenna to the connection
marked INSIDE. Hand tighten the connections and secure any loose cable.

STEP 4. CONNECT TO POWER

❸ ❸
GUI
BL
Power Connector
Connect the DC power cord connector to the signal booster and the adapter
end to the cigarette lighter adapter to your vehicle. Once all connections are
connected, turn the power switch on the adapter to ON. The POWER LED
will briefly flash YELLOW/RED during initialization to indicate that the signal
booster is ready for use.
Note: This booster is also compatible with an AC power adapter, SureCall part
# SC-AC-5.9V2.8A-B.
❸ ❸
❷
Inside
patch antenna
❶
DC 5V-12V
INSIDE
© 2024 SureCall, Inc. All rights reserved.
XR
™
❶ ❶
❸
Booster
❸ ❸
To Inside Patch
Antenna
Power Switch
❹
DC power
supply
❹ ❹