Table of Contents
Advertisement
UC924 IP Phone
Configuring Network using the web interface
1. Login to the web interface (refer to
Network→ Basic→ IPv6 setting
2. Select the desired IPv6 Setting: DHCP or Static
3. Enter required fields
4. Click on SaveSet and restart the phone
IPv4 & IPv6
If you set IP Mode to IPv4&IPv6, phone will support both IPv4 and IPv6 addressing. The settings of
DHCP, Static, and PPPoE are same as above.
Configuring IPv4 & IPv6 using the phone interface
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IP
Port Mode.
2. Press Left arrow or Right arrow key to change the IP Port Mode
3. Press OK or Save soft key to save the configuration
Copyright © 2019 Xorcom Ltd.
Web Login
for details of the login process) and click
All rights reserved
Page 71 of 193
Advertisement
Table of Contents
Need help?
Do you have a question about the UC924 and is the answer not in the manual?
Questions and answers