Configuring Pppoe Using The Phone Interface - Xorcom UC924 User Manual

UC924 IP Phone
3. Click Save and restart the phone.
4. Press the Save soft key to accept the change or the Cancel soft key to cancel. If you are using
an xDSL modem, you can connect your phone to the Internet using the PPPoE mode. You can
set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to obtain
the IP address. Contact your system administrator for the PPPoE user name and password.

Configuring PPPoE using the phone interface

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port →
PPPoE mode.
2. Enter the User ID and password
3. Click Save and restart the phone
Copyright © 2019 Xorcom Ltd. All rights reserved Page 67 of 193