Operation Lock (Press [Mode] For An Extended Time (2S)) - Mitsubishi Electric FR-F 700 EC Instruction Manual

Operation panel (FR-DU07)
3.2.3

Operation lock (Press [MODE] for an extended time (2s))

Operation using the setting dial and key of the operation panel can be made invalid to prevent parameter
change and unexpected start and stop.
· Set "10 or 11" in Pr. 161, then press
· When the setting dial and key operation is made invalid,
When the setting dial and key operation is invalid,
performed. (When the setting dial or key operation is not performed for 2s, the monitor display appears.)
· To make the setting dial and key operation valid again, press
POINT
Set "0" (extended mode parameter valid) in Pr.160 User group read selection.
Set "10 or 11" (key lock mode valid) in Pr.161 Frequency setting/key lock operation selection.
1.
Screen at powering on
The monitor display appears.
2.
Press
operation mode.
3.
Press
setting mode.
4.
Turn
5.
Press
" "(initial value) appears.
6.
Turn
it to the setting value of "
7.
Press
8.
Change Pr. 161 to the setting value of "
in the similar manner.
(Refer to step 4 to 7.)
9.
Press
Stop and reset with
CAUTION
Release the operation lock to release the PU stop by key operation.
30
for 2s to make the setting dial and key operation invalid.
Operation
to choose the PU
to choose the parameter
until (Pr. 160) appears.
to read the currently set value.
to change
".
to set.
for 2s to show the key lock mode.
Functions valid even in the operation lock status
.
appears on the operation panel.
appears if the setting dial or key operation is
for 2s.
Display
PU indication is lit.
Flicker Parameter setting complete!!
···
"
Flicker Parameter setting complete!!
···
Press for 2s.
The parameter
number read
previously
appears.