Tar River SRB-870 Owner's Manual page 21

Mini Round Baler SRB-870
Rear Door Closing Rate:
If the flow control valve handle is parallel to the control valve body it is fully open. There is no restriction
•
of flow. Note: In the fully open position, the rear door will close rapidly. Anyone standing under or
near the door could be seriously injured. The rear door is extremely heavy!
To slow the rear door when closing, move the handle clock-wise to achieve the desired speed.
•
There are times when the operator will need to lock the flow control valve such as for maintenance. To
•
lock the cylinder, rotate the handle clock-wise until it stops. Remember to unlock flow control valve before
continuing operation.
Flow Control Valve - Open 100%
Resetting Twine Arm:
It may be necessary at times to reset the Twine Arm.
•
Push the Release, pull up on the short arm and lift the Binding Arm to about 90 degrees.
•
If the short arm won't come up, open RH side cover and rotate the Twine Pulley clock-wise until the short
•
arm releases.
Adjustments
Short Arm
Release Lever
Flow Control Valve - Locked
Binding Arm
21