Mini Round Baler SRB-870
Number of Wraps per Bale:
The number of wraps per bale is controlled by the pulley located under the front RH side cover of the ma-
•
chine.
There are two positions on the pulley. The large slot will wrap the bale approximately 11 times. The small
•
slot will wrap the bale approximately 8 times.
If the bales are very dry, bales are to be handled more or if the material baled is short, use the larger diame-
•
ter slot in the pulley for more wraps.
The smaller pulley should be used for longer hay.
•
Pick-up Height:
Lower the pick-up by pushing down on the lever, rotate the lock to the right and allow the handle to move
•
up.
Adjust height of pick-up using the pick-up chain.
•
Under normal operating conditions, the pick-up tines should be approximately 1 inch from the ground.
•
If the field contains rocks or is uneven, set the tines higher to prevent damage to pick-up and tines.
•
Lower the pick-up for lighter, shorter materials baled.
•
When transporting the baler, make sure the pick-up is in the transport position or damage could occur to
•
baler.
Adjustments
Twine Pulley
20