Operating Instructions - Tar River SRB-870 Owner's Manual

Mini Round Baler SRB-870

Operating Instructions

Initial Preparation for Baling:
The pick-up handle must be moved to the "Operation" position prior to baling. This will lower the pick-up.
Pull down on handle, move the latch to the right and allow the handle to move up. NOTE: Only lower the pick
-up when ready to begin baling. When transporting to and from the field, raise the pick-up to prevent damage
to the machine.
Transport Position
Operation Position
Use the height adjustment chain to raise or lower the height of the pick-up so that the tines are approximately
1" from the ground. This measurement is for reference only. The operator should run the machine for a period
of time to determine if the pick-up height should be higher or lower depending on the height and type of mate-
rial baled. Shorter grass may require a lower setting to properly pick-up material. Longer grass may require a
higher setting to prevent clumping of material.
Note: For cleaner material and longer life of tines, avoid continuous contact
with the ground.
Height Adjustment Chain
17