Tar River SRB-870 Owner's Manual page 12

Mini Round Baler SRB-870
Attaching wheels:
The baler wheels are stored inside the baler rolling chamber at the rear of the baler for shipping purposes.
The rear door is opened by the baler hydraulics.
Opening rear door:
Press and hold the red button on the controller to activate the hydraulic cylinder to raise the door. Cau-
•
tion: Before attempting to open the rear door, make sure that no one is standing near the rear of the baler.
Be sure there is ample room behind the baler to open the rear door.
Warning: The rear door remains open as long as the operator presses the red button. Once the red button is
•
released, the rear door will close. Depending on where the flow control handle is set, the door can close
very rapidly. Do not allow anyone to stand near the rear door until the flow valve handle is in the locked
position.
Locking rear door: rotate the flow control valve handle 90 degrees to the valve body.
•
Flow Control Valve - Open 100%
Assembly
Flow Control Valve - Locked
12