Advertisement
IMPORTANT
Ÿ
Use a soft cloth between these parts and the floor.
Ÿ
Do not use power tools above 8 volts to assemble.
Ÿ
Do not tighten all the bolts until each part is properly assembled.
Ÿ
Keep Hex Wrench as the bolts may need to be tightened in the future.
Wood Screw
B
STEP 1
Attach Legs (B) and (C) to Seat (A) with Flat Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 1)
Attach Front Stretcher (G) to unit with Wood Screws.
(See Figure 2)
Orientate Side Stretchers (E) and (F) so Arrow labels are at front of unit, then attach
Side Stretcher (E) to Leg (B) and Side Stretcher (F) to Leg (C) with Wood Screws.
(See Figure 3)
Figure 1
Assembly Instructions 2/3
G
C
E
Figure 2
Arrow label at front
F
A
Head Cap Bolt
Spring Washer
Flat Washer
Figure 3
Advertisement
