Page 1
20 pcs. (+1 extra) 16 pcs. (+1 extra) Carton 20 08002 0692 is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 2
Assembly Instructions 2/11 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Make sure unit is level before tightening these screws. The unit must be level to work properly. Use the included adjustable levelers to level. Cam Lock Screw STEP 1 Insert Cam Lock Screws into pre-drilled holes in Top (A),...
Page 3
Assembly Instructions 3/11 STEP 2 Cam Lock Attach Plinths (J) to Plinths (K) with Cam Locks. (See Figure 2) Figure 2 Dowel Wood Screw (long) STEP 3 Place Base (E) upside down on a soft cloth. Insert Dowels into pre-drilled holes in Base (E).
Page 4
Assembly Instructions 4/11 STEP 5 Cam Lock Insert Dowels into pre-drilled holes in Side Panels (F). Attach Back Uprights (G) to Side Panels (F) with Cam Locks. Dowel STEP 6 Attach units from Step 5 to unit from Step 4 with Cam Locks. Cover Cam Locks with Plastic Caps (large).
Page 5
Assembly Instructions 5/11 STEP 7 Plastic Cap (small) Wood Screw (short) Attach Rail (C) to Middle Panel (B) with Wood Screws (short). Cover Wood Screws (short) with Plastic Caps (small). (See Figure 6) Figure 6 Cam Lock Screw (long) Dowel (long) STEP 8 Insert Dowels (long) and Cam Lock Screws (long) into pre-drilled holes...
Page 6
Assembly Instructions 6/11 STEP 9 Hinge Wood Screw Attach Hinges to Doors (I) with Wood Screws for Hinge for Hinge into pre-drilled holes, then tighten. (See Figure 8) Figure 8 Wood Screw Adjustable Pin for Hinge Figure 9 Figure 10 STEP 10 Attach Doors (I) to unit with Wood Screws for Hinge.
Page 7
Assembly Instructions 7/11 Cam Lock STEP 11 Insert Dowels into pre-drilled holes in Side Panels (F). Attach Back Uprights (G) to Side Panels (F) with Cam Locks. Dowel STEP 12 Attach units from Step 11 to unit from Step 10 with Cam Locks. Cover Cam Locks with Plastic Caps (large).
Page 8
Assembly Instructions 8/11 Plastic Cap (small) Wood Screw (short) STEP 13 Attach Rail (C) to Top (A) with Wood Screws (short). Cover Wood Screws (short) with Plastic Caps (small). Plastic Cap (large) Cam Lock Dowel STEP 14 Insert Dowels into pre-drilled holes in unit from Step 12.
Page 9
Assembly Instructions 9/11 STEP 15 Hinge Wood Screw Attach Hinges to Doors (I) with Wood Screws for Hinge for Hinge into pre-drilled holes, then tighten. Wood Screw Adjustable Pin for Hinge STEP 16 Attach Doors (I) to unit with Wood Screws for Hinge. Insert Adjustable Pins into side panels at desired level.
Page 10
Assembly Instructions 10/11 STEP 17 Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 11) Attach Plastic Clips to unit with Wood Screws for Plastic Clip. (See Figure 12) Note: Unit must be level before attaching Plastic Clips. Figure 11 Wood Screw for Plastic Clip...
Assembly Instructions 11/11 IMPORTANT To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly. STEP 19 Anchor in wall Wall Screw Bracket 3/16” hole in Place unit at desired location. on wall side panel of unit 3/8”...
Page 12
Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 20 08002 0691 and is the answer not in the manual?
Questions and answers