Advertisement
Quick Links
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
H.
Side Panel
2 pcs.
F.
Shelf
1 pc.
Hardware List
Cam Lock Screw
46 pcs. (+2 extra)
Cam Lock
46 pcs. (+6 extra)
Carton 20 08001 0931 is also needed for assembly.
Tool(s) required for assembly: Phillips screwdriver, Level
Home Styles Customer Service: www.homestyles-furniture.com,
servicedesk@homestyles-furniture.com,
20 08001 0932
Kitchen Island
M3.5x64
Wood Screw for Base
12 pcs. (+1 extra)
Dowel
36 pcs. (+1 extra)
I.
Side Panel
2 pcs.
G.
Shelf
4 pcs.
M3.5x38
Wood Screw
10 pcs. (+1 extra)
M3.5x14
Wood Screw for Hinge
48 pcs. (+1 extra)
888-680-7460, 877-831-0319
J.
Side Panel
2 pcs.
L.
Drawer
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
Cover
16 pcs. (+1 extra)
Hinge
Adjustable Pin
8 pcs.
20 pcs. (+1 extra)
Advertisement
Related Manuals for Home Styles 20 08001 0932
Summary of Contents for Home Styles 20 08001 0932
- Page 1 46 pcs. (+6 extra) 36 pcs. (+1 extra) 48 pcs. (+1 extra) 8 pcs. 20 pcs. (+1 extra) Carton 20 08001 0931 is also needed for assembly. Tool(s) required for assembly: Phillips screwdriver, Level Home Styles Customer Service: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
- Page 2 Assembly Instructions 2/8 IMPORTANT Ÿ Use a soft cloth between these parts and the floor. Ÿ Do not use power tools above 8 volts to assemble. Ÿ Make sure unit is level before tightening these screws. Ÿ The unit must be level to work properly. Use the included adjustable levelers to level. Cam Lock Screw STEP 1 Insert Cam Lock Screws into pre-drilled holes in Top (A), Plinths (C),...
- Page 3 Assembly Instructions 3/8 STEP 2 Cam Lock Attach Plinths (C) to Plinths (D) with Cam Locks. (See Figure 2) Wood Screw for Base Figure 2 STEP 3 Place Base (B) upside down on a soft cloth. Insert Dowels into pre-drilled holes in Base (B).
- Page 4 Assembly Instructions 4/8 Dowel STEP 4 Cam Lock Insert Dowels into pre-drilled holes in Side Panels (I). Attach Side Panels (H) to Side Panels (I) with Cam Locks. Insert Dowels into pre-drilled holes in units. Attach Side Panels (J) to units with Cam Locks. Cam Lock Dowel STEP 5...
- Page 5 Assembly Instructions 5/8 Wood Screw STEP 6 Insert Dowels into pre-drilled holes in unit. Attach unit from Step 3 to unit with Wood Screws into pre-drilled holes. Dowel Wood Screw for Hinge Hinge STEP 7 Place Doors (K) face down on a soft cloth. Attach Hinges to Doors (K) with Wood Screws for Hinge into pre-drilled holes, then tighten.
- Page 6 Assembly Instructions 6/8 Wood Screw for Hinge Adjustable Pin STEP 8 Turn unit from Step 6 over to its’ upright position. Attach Doors (K) to unit with Wood Screws for Hinge. (See Figure 6) Insert Adjustable Pins into side panels at desired level. (See Figure 7) Place Shelves (F) and (G) into position.
- Page 7 Assembly Instructions 7/8 Drawer (L) STEP 9 Insert Cam Lock Screws into pre-drilled holes in Drawer Front (L1), then tighten. Attach Drawer Sides (L2) to Cam Lock Screw Drawer Front (L1) with Cam Locks. Cam Lock Cover Cam Locks with Covers. Cover STEP 10 Cam Lock...
- Page 8 Assembly Instructions 8/8 STEP 12 Cover Dowel Cam Lock Insert Dowels into pre-drilled holes in unit. Attach Top (A) to unit with Cam Locks. Cover Cam Locks with Covers. Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 8) Note: Unit must be level to work properly.
- Page 9 Buff with a dry clean cloth. Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized retail affiliate, Home Styles is under no obligation to provide replacement parts.
Need help?
Do you have a question about the 20 08001 0932 and is the answer not in the manual?
Questions and answers