Replacing The Projection Lens - Eiki EK-610UA Owner's Manual

3.
Use the arrow keys (pq) to select Light Source Settings and press the Enter button to enter its
submenu.
4.
Use the arrow keys (pq) to select Reset Lamp Hours and press the Enter button to enter its
submenu.
5.
Use the arrow keys (pq) to select Yes and press the Enter button to reset the lamp used hours
counter to zero.
6.
Press the Exit button several times to exit the menu.

Replacing the Projection Lens

Perform the following to replace the projection lens:
1.
Center the lens. Use the Lens H or Lens V button (on the remote control) to adjust the lens at its center
position.
Important:
• Ensure that the lens is at or near its center position.
• Attempting to remove the lens when at a large offset may cause damage to the lens assembly.
PICTURE
Light Source Mode
Constant Power Settings
Total Projector Hours
OUTPUT
Lamp Hours
Reset Lamp Hours
SETUP
OPTION
Light Source Settings
Reset Lamp Hours
No
Yes
57
— —
DLP Projector — Owner's Manual
Constant Power
10