Reading The Internal Memory Of An Ic And Saving The Data Out In Binary Format - Dataman S6 User Manual

Upon completion of the selected procedures the result will be displayed by a "PASS/FAIL". If
any problems do occur during the process, the system will stop and the failed process will
be highlighted in red.
If the error is relating to the IC placement or orientation in the ZIF socket or adapter or if an
ID check error occurred, it will be displayed in the message window. You can repeat the
procedure after solving the problem.
5-2 Reading the internal memory of an IC and saving the data out in
Binary format
1. Click the
part name of the IC into the "Search" box. Select the matching manufacturer and part name
and click
2. In this example we will read a NOR FLASH device in a TSOP package. Make sure you have
the appropriate adapter socket and insert it into the ZIF socket of the programmer. Make
sure it is aligned correctly, that is towards the bottom of the ZIF socket. The adapter is
usually marked with a "1" to indicate the position of pin 1 on the adapter, this should be
oriented towards the top left. Follow the indication on the adapter socket for the correct
placement of the IC within the adapter.
button to enter the "Device Select" page. Enter the full or partial
to finish.
Dataman-S6 - User's Manual
24