Save File Path And Name; Save File Format; Buffer Range For Saving; Device Processing Procedure - Dataman S6 User Manual

4-6-1 Save File Path and Name

The path where you would like to save the data. The file name may not already exist on the
disk, in which case the software will automatically generate it when saving.

4-6-2 Save File Format

Select the file format.

4-6-3 Buffer Range for Saving

Choose the address range of the main memory blocks for saving out to a file.

4-7 Device Processing Procedure

The following descriptions relate to actions that are performed on the IC. Before
programming the buttons will not be highlighted, during programming they will be highlighted
yellow, and when programming is complete they will be highlighted green to indicate
success or red to indicate an error.
Dataman-S6 - User's Manual
File browser
Automatically set to the capacity of
the currently selected IC
17