Dataman S6 User Manual page 25

that data. If even one bit in the buffer were to change, this value would be different. It is
worth noting down the checksum value for a specific data file or from a master IC which has
been read into the buffer, this can be used at a later date to verify the data file or IC contents
have not changed.
With some IC's the "Check Sum" calculation requires the IC to be selected and the file
loaded into the buffer while the programmer is connected.
5. Place the IC in the programmer's ZIF socket towards the bottom with the index mark
towards the top and lock down the lever.
6. In this example we need to set the protection on this IC. Because this IC has several
protection options we need to click on the
Option'\'Lock Bit Option" page and select the required protection options. Press the
button to save the selection and return to the main screen.
If you do not carry out this process the programmer will not correctly protect the IC and will
cause a error.
22
Dataman-S6 - User's Manual
button to enter the "Device