View/Edit Mode; Option Settings; General System Settings; Insertion Detection - Dataman S6 User Manual

4-4-2 View/Edit Mode

View mode is just for displaying the current buffer data, the contents can not be changed in
this view. Selecting the "Edit" button allows you to modify the data. To avoid the data in the
buffer being inadvertently changed, the default mode will always be the View mode.

4-5 Option Settings

This page allows you to modify settings for the software and additional options relating to the
selected IC. The settings will take effect immediately without pressing a confirmation key.

4-5-1 General System Settings

4-5-2 Insertion Detection

Before every action on the IC the system will check whether the IC is present in the ZIF
socket, if it is in the correct position, if the socket is empty or if there is a bad connection. If
there is a problem it will stop performing further actions and display a message.
If this option is not checked, the programmer will not perform the above checks.
※
If the item can not be checked this means that the selected IC does not support this
function.
Dataman-S6 - User's Manual
1
2
5
14
3
4
6