Camera Access With Internet Explorer; Camera Login; Control Panel Overview - Avtech IC-AVM5547 Operation Manual

2. CAMERA ACCESS WITH INTERNET EXPLORER

This network camera can be accessed via Microsoft Internet Explorer and iOS / Android mobile devices with our
self-developed program EagleEyes installed depending on different using situations.
Before using the camera, make sure you have configured the network settings, and the network connection is fine.
For network configurations, please download

2.1 Camera Login

Step1: Open your web browser, and key in
For example, for the IP address 60.121.46.236 and port No. 888, please key in "http://60.121.46.236:888" into
the URL address box, and press Enter.
Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.
Then, click LOGIN.
Step3: The wizard is then started.
‧ To skip the wizard and directly access the camera live view, click Close.
‧ To directly access the camera live view without starting the wizard for the login next time, check Do not start wizard at
login.
Note: If you're prompted to install VLC player, Software and Streaming Viewer, please agree to
proceed the installation.
Step5: When the login is successful, the live view is shown.

2.2 Control Panel Overview

Note: The buttons available depend on the device you have and the user level used to log in.
"Advanced Network Setup".
http://ipaddress:portnum
3
in the URL address box.