Advertisement
Available languages
Available languages
12
www.raider.bg
1.26. In reversing the direction of movement on slopes be extra careful!
1.27. When you turn on the electric hair grass to watch your feet are safely away from moving
parts.
1.28. Do not use the machine when barefoot or with sandals. Always use a strong, closed
shoes and long pants.
1.29. Switch off the circuit breaker and unplug from the electrical outlet is always:
when away from the machine;
before removing items blocking machine;
When checking, cleaning or working on the machine;
when the machine starts to vibrate abnormally strong.
after coming into contact with a foreign body immediately check the machine for damage
before it benefits provided for their removal;
1.30. The operator or user responsible for accidents, injuries to other persons or the
environment and caused material damage.
1.31. Electric hair grass is so designed that all moving parts and ensure safe housing
conditions of use. For damage caused by attempts to change the structure of the electric hair
grass manufacturer is not liable.
1.32. To ensure safety, should only use original spare parts or parts manufacturer.
1.33. Failure to follow the instructions may lead to electric shock, fire and / or serious injury.
2. Functional Description and purpose.
Electric hair handheld power tool with a second-grade insulation. It is powered by single
phase motor with collector ac and is designed for mowing grass at home. Do not allow the use
of electric hair grass for activities other than its intended purpose.
3. Assembling the components of the electric hair grass and commissioning.
Some parts of the hair are dismantled to reduce the volume of container during transport.
3.1. Install the fuse
3.2. Mounting the saw blade or a trimmer head.
When mounting the cutting equipment is crucial to supporting flange gets right into the
center opening of the cutting equipment. Incorrectly mounted cutting equipment can lead to
serious and / or dangerous injuries.
3.3. Mounting the knife.
Place the cutting blade on the locking flange so that the opening of the blade fits snugly
into the flange.
3.4. Installing the trimmer head.
Screw clockwise counterclockwise trimmer head to the shaft using locking lever. If the
length of the cord is not enough press in the middle of the trimmer head and pull the cord to
the desired length. If the length of the cord is greater than the diameter of the protective cover
when you turn the mower, the cord will be cut to required length of the blade mounted on the
hood.
Advertisement
