Safety And Operating Decals - Generac Power Systems MAGNUM MLT6SM Owner's Manual

Safety and Operating Decals

See Figure 1-1 through
numerous safety and operating decals. These decals
provide important operating instructions and warn of
dangers and hazards. The following diagrams illustrate
decal locations and descriptions.
ID
1 Setup and Take-Down Instructions (Electric)
2 Setup and Take-Down Instructions (Manual)
3 Danger—Overhead Power Lines
4 Warning—Electrical Storms and High Wind
5 Owner's Manual Location
6 Electric Shock Hazard
7 Warning—Hot Surface
8 Warning—Pressurized Liquid
9 Warning—Entanglement Hazard
10 Warning—Cutting Hazard
11 Disconnect Battery Before Servicing
12 Danger—Carbon Monoxide
13 Electrical Ground Connection
14 Danger—Ultraviolet Radiation / Winch Operation
Owner's Manual for MLT6SM/6SK Light Tower
Figure 1-3. This unit features
Description
Replace any missing or hard-to-read decals and use care
when washing or cleaning the unit. Decal part numbers
can be found in
www.generacmobileproducts.com.
ID
15 Control Panel Label (not shown)
16 Neutral Bonded to Frame
17 Not A Step
18 Warning—High Temperature: Do Not Remove Guard
19 Mast Junction Box Wiring (inside)
20 Warning—Do Not Retract Outriggers With Tower Up
21 Stowed Position
22 Lifting Point
23 Forklift and Tie-Down Point
24 Engine Operation
25 Ultra Low Sulfur Diesel Fuel Only
26 Danger—Fuel and Fueling Hazards
27 Tie-Down Point
28 Towing Instructions
Introduction and Safety
the parts manual
Description
at
7