Table of Contents
Advertisement
Select DSK ON, as shown in figure
, then set the input ports, including preset selection,
custom mode, alpha and color setting. Click "Set" to confirm.
Source Backup
Click the "Source Backup", and pop up window as follows:
Click "play group", and pop up window as follows:
Enable the hot backup function, as shown in figure
. Users can select the number of
source from 2 to 6. It will switch to the backup signal if the signal is interrupted.
© Xiamen RGBlink Science & Technology Co., Ltd.
40 / 51
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com
Advertisement
Table of Contents
