RGBlink X3p Quick Start Manual page 22

Scale: Set the X, Y, width and height.
Crop: Crop the left, top, width and height.
Display Mode: Select "Live" or "Freeze".
Mirror: Enable or disable the mirror function, default "OFF".
Bypass Mode: Enable or disable the bypass mode. When select "ON", the output format will be the
same with the input format.
Alpha: Set the alpha, the adjustment range is 0~128.
Sharpness: Set the sharpness, the adjustment range is 0~100.
Brightness: Set the brightness, the adjustment range is 0~100.
Contrast: Set the contrast, the adjustment range is 0~100.
Saturation: Set the saturation, the adjustment range is 0~100.
Color Term: Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset: Select "Reset", the input property will be recover to factory setting.
Refresh Signals: Right click the input and select "Refresh Signals". If there is signal, it will show the
input format, or it will show "No Input".
USB Player: Right click the USB input, and select "USB Player", it will enter to the USB Player interface,
including movie and picture, default play the USB movie.
© Xiamen RGBlink Science & Technology Co., Ltd.
21 / 51
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com