Table of Contents
Advertisement
Scale: Users can input parameter of X and Y to set the scale, and the default parameters of width and
height are 3840 and 2160.
Crop: Users can input parameter of X and Y to set the crop, and the default parameters of width and
height are 3840 and 2160.
Reset: If improper operation occurs, it can be restored by reset.
Set: After setting scale and crop, click "Set" to confirm.
Brightness: Users can slide switch to set brightness ranging from 0 to 100.
Contrast: Users can slide switch to set contrast ranging from 0 to 100.
Color Temp: Users can click the drop down arrow to select CT_9300, CT_7500, CT_6500, CT_5800,
CT_SRGB, CT_USER. If select CT_USER, users can set the parameter of Red, Green and Blue
ranging from 0 to 100.
4K: Click "Signal 4"(4K signal connected), then pop up the window as follows:
© Xiamen RGBlink Science & Technology Co., Ltd.
23 / 51
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com
Advertisement
Table of Contents
