Table of Contents
Advertisement
Input Module: Show the current 4K input module like "Input Module 1".
Work Mode: Users can select "4K×2K, 4K×1K, 2K×1K and PIP.
Input Type: Users can select DUAL DVI, HDMI 1.4, HDMI 2.0 or DP 1.2, then click"Set" to confirm.
HDMI 2.0 Port Edid Set: Users can input parameter. For example, set Width as "3840", set Height as
"2160", and set Freq as "60", then click "Set" to confirm. If improper operation occurs, it can be restored
by reset.
Output Setting
Click "Monitor" shortcut
, it will enter the interface as follows:
In videowall mode, there are max 16 image in the output interface, group of two outputs, one output
module can display 8 images.
Split Mode: Default quick split "OFF". User can enable the quick split function by sliding the switch to
"ON". LED type and LCD type can also be selected by sliding the monitor type switch, specific as
follows:
LED Type: Default LED type. In LED type, users can select equal type and unequal split type.
Equal Type: Users can custom the H total, V total, row and column, for example, set H total as 7680, V
total as 2160, Row as 2 and Column as 4, as shown in the figure below:
© Xiamen RGBlink Science & Technology Co., Ltd.
24 / 51
Ph: +86 592 5771197 |
support@rgblink.com
|
www.rgblink.com
Advertisement
Table of Contents
