ADTRAN Atlas 550 Q&A page 3

Configuring Packet Endpoints
The ATLAS uses Packet Endpoints to terminate frame relay connections.
1. From the main menu go to Packet Manager/Packet Endpnts/Config.
2. Press the right arrow. A new entry will automatically be created. If an entry already
exists, highlight the line item number and press the 'I' key to insert a new entry. The 'D'
key may be used to delete an entry.
3. Change the Endpnt Name to reflect something meaningful. In Figure 3, the Endpnt
Name is FR.
4. Change the Protocol to Frame Relay.
5. Press <enter> on the [+] symbol in the Config column.
Figure 2