Configuring Dial Plan - ADTRAN Atlas 550 Q&A

4. Once the IARP and RIP packets have exchanged, you will then be able to see the
updated routing table in the Routes menu.

Configuring Dial Plan

The Dial Plan will contain the configuration necessary to compress and uncompress the voice as
well as route the voice calls based on the digits dialed.
1. From the Main Menu, go to Dial Plan/User Term.
2. Create a new entry.
3. Under Slot/Svc, select PktVoice.
4. Under Port/PEP, select the packet endpoint for the frame relay connection. For the
example, the packet endpoint will be FR.
5. Press <enter> on In#Accept and configure the extension number for calls which should
be routed to the remote site. This is the field in which phone numbers are assigned to
each remote phone. For the Atlanta remote, the phone numbers will be 1601 for Line
1and 1602 for Line 2. For the Birmingham remote, the phone numbers will be 1701 for
Line 1 and 1702 for Line 2. See Figure 12.
Figure 11