Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1 Series Installation Instructions Manual page 14

CL33600 Series Cylindrical Lock
12. Install Controller
Please follow these steps prior to installing inside escutcheon to prevent
any damage caused by pinching wires:
a. Once wires are arranged, position controller at a rotated angle against the
door, under the earth ground wire.
b. Press piece against door while turning clockwise (Fig. 12a).
c. Twist into place, perpendicular with door (Fig. 12b).
Fig. 12b
d. Connect P3 (2-pin connector) from lock body to J3
on module (Fig. 11c).
e. Connect P4 (6-pin connector) from lock body to J4
on module (Fig. 11c).
13. Inside Escutcheon Assembly:
Tighten the inside escutcheon securely to
the mounting plate with the Phillips flat
head machine screws provided.
Copyright © 2017 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) Installation Instructions (Continued)
P3
Fig. 12c
14
P4
Fig. 14
Rotate Clockwise
Fig. 12a
Inside Face of Door
#8-32 x 5/8" Long
Phillips Flat Head
Escutcheon Screws