Test 28 Result: Pes Incomplete Tag Test - Nielsen ID3 User Manual

Test 28 Result: PES Incomplete Tag Test

Format
Format
Number of Incomplete ID3 Tags
0
Maximum Tolerated
Meaning
If the size of the payload in the Nielsen ID3 metadata stream is not large enough to hold
a complete Nielsen ID3 tag, Validator reports an error. An incomplete payload cannot be
decoded.
Each Nielsen ID3 tag spans two transport packets. If the size of the payload (as specified
in the PES header) is correct, but the second transport packet contributing to the payload
is missing, Validator declares an incomplete-tag error.
Corresponding Log Message
If Validator determines that the metadata PES payload is the wrong size or that the
second packet in the payload is missing, it logs a message.
Example
The example shows that no PES payloads were the wrong size. The test passed
because Validator allows up to seven badly sized PES packets.
Release 1.8 Revision F
-65: Invalid tag returned from tag buffer. Wrong size.
MPEG-2: PES Incomplete Tag Test:
<number of incomplete ID3 tags /
0 / maximum tolerated>
Number detected
Not used
Maximum number of errors tolerated before
failure is declared
Pass <0/0/7>
41
ID3 Tag Validator Application User Manual
Nielsen Confidential