Validator Output: Summary Report
Overview
Validator always generates the two output files listed in Table 3.
Summary Report
Log file
Do the following:
1.
To determine whether the source ID3 tag stream contains errors, review the
Summary Report.
The code labeled as Figure 2 below shows an example of a Summary Report
generated when the application was run with the -m option. The Summary Report
has four major components, which are described in detail in the sections that follow
this one:
2.
To see more details on any errors, review the log file.
Release 1.8 Revision F
Table 3 – Default Output Files
File
Ends With
_report.txt
_log.txt
•
File header
•
SID list
•
INFO tag list
•
30 pass/fail test reports
VALIDATOR SUMMARY REPORT, Version 1.8
File evaluated: stress_test.m3u8
Duration: 915 seconds
Breakout Type: 0
FD SID
9120: NAES 2 count = 129, NAES 6 count = 114
PC SID
9020: NAES 2 count = 111, NAES 6 count = 103
PC SID
9051: NAES 2 count = 108, NAES 6 count = 106
FD SID
9151: NAES 2 count = 128, NAES 6 count = 127
INFO TAG:
Vendor ID: 999
Device Type: Transcoder or related device
Device ID: C81F66B8057C
SystemVersion: 1234
SDK Version: 2.3
Description
Summarizes the results of the
ID3 tag analysis
Lists messages about errors or
anomalies found in the ID3 tag
stream
16
ID3 Tag Validator Application User Manual
Nielsen Confidential