Current SILENT TRAC Installation Manual page 9

Slide the hardstop back into the track and secure with screw. See
Figure 23.
3. CONNECT THE MOTORS
On a single drapery, insert the motor shaft onto the motor end of the
drapery track and twist the motor into place. See Figure 24.
On a dual drapery, insert Motor 1 (longer) into the window side track.
On center draw applications, the motor may be mounted at either end
of the track. Twist the motor into place. The locking tab will make an
audible click when it locks into place. See Figure 25.
Insert Motor 2 (shorter) into the roomside track. Twist the motor
into place. The locking tab will make an audible click. See Figure 26.
Orienting the plug correctly, plug the cord from Motor 2 into the
bottom of Motor 1. If you do have a control box, proceed to Step 6.
See Figure 27.
Figure 23 - Slide hardstop back into track and secure with screw
Figure 25 - Attach primary motor
Figure 26 - Attach secondary motor
Figure 27 - Plug secondary motor into primary motor
9
Figure 24 - Attach motor