Connect Power - Current SILENT TRAC Installation Manual

1. CONNECT POWER

On battery powered units, untwist the Pendant and insert (6) or
(8) D Alkaline batteries, negative end first. See Figure 38.
Twist the Pendant lock to secure back onto the unit. See Figure 39.
On rechargeable battery powered units, twist the Pendant lock
to secure onto the unit. See Figure 40.
To charge, plug the charger power input into the jack in the bottom
of the Pendant and plug the wall port into the desired outlet. The
Pendant does not need to be connected to the drapery to charge.
See Figure 41.
On low voltage units, twist the Pendant lock to secure onto the
unit. See Figure 42.
II. Start up
Figure 41 - Plug input into bottom of Pendant and plug into wall outlet
12
Figure 38 - Insert Batteries into the Pendant
Figure 39 - Screw the Pendant onto the Cord
Figure 40 - Screw the Pendant onto the Cord
Figure 42 - Screw the Pendant onto the Cord