Current SILENT TRAC Installation Manual page 2

Wall Mount Drapery Track Installation
For additional help during installation of your drapery track, visit www.currentproductscorp.com/support/drapery-track or call
1-844-307-7435.
For proper installation of your track drapery, the following tools are required:
1/4" nut driver
5/64" hex screwdriver (spliced tracks only)
6" magnetic bit holder extension for drill
Tape measure
Drill
Level
Pencil
Ladder
7/64" drill bit for stud applications
1/4" drill bit for drywall applications with toggler anchors
#2 Phillips Screwdriver
Stud Finder (optional)
Flathead Screwdriver (optional)
Vacuum Cleaner
Safety Goggles
Track (Right draw shown)
Carriers (installed)
Carrier Arm(s)
Track Splice
Return Clips
Secondary Motor
Primary Motor
Sensor Box
Brackets
Pendant
Fascia Clips
Fascia
2