Contec CNT24-2GY User Manual page 24

Step3 Starting "Found New Hardware Wizard"
Start "Found New Hardware
Wizard", then select "Install
from a list or specific
location[Advanced]" item and
finally click on "Next" button.
In Windows Vista, Because the
driver's installation is completed
by "Installing the Software", it
is not necessary to operate it
about the Hardware Wizard.
Detect setup information from
supplied disk automatically for
installing USB driver.
XXXXXX: device name being
searched out(the name from
getting rid of GY from the
model)
Points
Please specify the path for supplied disk as follows in the case of failure in detecting
automatically.
X:\INF\WDM\CNT
Step4 Clicking on [Finish] button
Click on [Finish] button to complete the
installation of USB driver.
CNT24-2(USB)GY
(X: disk drive)
3. Setup
17