Table of Contents
Advertisement
3. Setup
Installing the Utility
The utility is application with which you can verify device operation easily.
Run the X:\USBP_UTILITY\ENG\CntMnt\setup.exe (X : disk drive) from the [Run]
of start menu.
Please perform installation following the directions on the screen. And thus the
installation is completed.
Connecting to a PC
Connect the USB device to a PC and install the driver.
It is illustrated by taking example for Windows XP. Displaying screen may be
different according to different OS, but basic settings are the same.
Points
- You must be logged on as an administrator or a member of the Administrators group
to work on Windows 2000 or Windows XP.
- The name detected by Windows and displayed by software is the model removing the
"GY".
It may cause a trouble in recognizing and operating the device according to the kind
of USB hub. If you use the USB hub, we encourage you to take advantage of the
CONTEC's product loan service to confirm operation before purchasing.
Step1 Setting supplied disk "API-USBP(WDM)"
The menu screen is displayed. The menu will be used in "Software Installation" on
page 15. (If the menu screen is not displayed for PC settings, please jump to Step2.)
Step2 Connecting USB port with a PC
Use the bundled USB cable to
connect the USB port of the
module to the USB port on the
PC.
Check the orientation of the
connector and plug it deep into
the port.
Note!
16
CAUTION
Make sure that the power is turned on before a PC is
connected when using AC adapter.
CNT24-2(USB)GY
Advertisement
Table of Contents
