Endress+Hauser Levelflex FMP53 Brief Operating Instructions page 16

Mounting
6.2.3 Turning the transmitter housing
To provide easier access to the connection compartment or display module, the transmitter
housing can be turned:
1.
8 mm
1. Unscrew the securing screw using an open-ended wrench.
2. Rotate the housing in the desired direction.
3. Tighten the securing screw (1.5 Nm for plastic housing; 2.5 Nm for aluminum or
stainless steel housing).
16
6 Nm (4.42 lbf ft)
3 m (9 ft) / 6 m (19 ft)
r
= 50 mm (2")
min
2.
Levelflex FMP53 PROFIBUS PA
max. 350°
3.
A0015103
8 mm
A0032242
Endress+Hauser