Table of Contents
Advertisement
5.1.3 Preheater replacement
1.
Switch off the power at the main switch and disconnect the Eurostecker
from the burner.
2.
If so desired, service position 1 may be used.
3.
Remove the brake plate and electrode package.
4.
Disconnect the preheater cable from the preheater.
5.
Screw off the nozzle.
6.
Undo the nut that connects the oil pipe to the preheater.
7.
Install the new preheater. Check the condition of the O-ring; replace
as necessary.
8.
Connect the preheater cable.
9.
Install the nozzle.
10.
Install the brake plate and electrode package. Check that the distance
between the nozzle and brake plate is correct
(refer to Technical data).
11.
Re-assemble the burner.
12.
Connect the Eurostecker and switch on the power at the main switch.
13.
Start the burner and check the combustion.
!
When servicing or replacing components that affect combustion, analyses and
soot tests must be carried out on the installation.
21
Bentone
Advertisement
Table of Contents
