Table of Contents
Advertisement
Woodstock Technical Support
We stand behind our machines! In the event that questions arise about your machine, parts are miss-
ing, or a defect is found, please contact Woodstock International Technical Support at 1-360-734-3482 or
send e-mail to: tech-support@shopfox.biz. Our knowledgeable staff will help you troubleshoot prob-
lems and send out parts for warranty.
If you need the latest edition of this manual, you can download it from http://www.shopfox.biz.
If you still have questions after reading the latest manual, or if you have comments please contact us at:
About Your New Pan and Box Brake
Your new SHOP FOX
48" Pan and Box Brake has been specially designed to provide many years of trou-
®
ble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure
safe and reliable operation.
This pan and box brake is an indispensable tool if you need to increase the strength of sheet metal
plates with bends, or you intend on fabricating more complicated brackets, gussets, boxes, and fix-
tures. When bolted to a concrete floor, your pan and box brake allows you easily bend 48" wide mild
steels up to 12 gauge thick in a range of angles from 0˚ to 135˚. The removable and adjustable fingers
can be installed in a variety of positions to accommodate for varying widths of metal.
Woodstock International, Inc. is committed to customer satisfaction in providing this manual. It is our
intent to make sure all the information necessary for safety, ease of assembly, practical use and durabil-
ity of this product be included.
INTRODUCTION
Woodstock International, Inc.
Attn: Technical Support Department
P.O. Box 2309
Bellingham, WA 98227
-2-
M1012 48" Pan and Box Brake
Advertisement
Table of Contents
