Table of Contents
Advertisement
Mounting Main Body to
Supports
To mount the main body to the supports, do these
steps:
1. Prepare for the main body placement by arranging
the supports so they are standing rightside-up, are
parallel with each other, and are spaced about four
feet away from each other (see Figure 8).
2. Using lifting equipment, position the main body over
the supports, then carefully lower the main body
onto the supports. Keep the lifting equipment in
place to prevent the main body from accidentally
falling before it is secured.
3. Secure the main body to the supports with the M12-1.5
x 40 hex bolts, 12mm flat washers, lock washers, and
hex nuts as shown in Figure 9.
Figure 8. Supports ready for brake
Figure 9. Main body mounted to supports.
-12-
M1012 48" Pan and Box Brake
placement.
Some components
for this equipment
are heavy and awk-
ward
to
handle.
Assembling
without
proper
equipment
increase the likeli-
hood of injury.
them
may
Advertisement
Table of Contents
