Setting With The Operation Panel; Setting With The Riso Console; Group Setting - Riso ComColor Series Administrator's Manual

■ Setting with the operation panel

Press [Login setting] on the
1
[Admin. Settings] screen.
Configure the settings.
2
When using an IC card reader, use [Change] in
printer mode to configure [Automatic print start of
waiting job].
3 Press [OK].

■ Setting with the RISO Console

1 Click [Login setting] on the
[Admin.] screen.
2 Configure the settings.
Configure [Automatic print start of waiting job]
when an IC card reader has been connected.
18
Click [OK].
3

Group setting

Specify the groups to indicate user attributes. The
groups set here are used with [Group] for [User
setting]. You can configure up to 60 groups.
■ Setting with the operation panel
1 Press [Group setting] on the
[Admin. Settings] screen.
2 Press [Add].
3 Enter the group name and press
[OK].
● To change or delete a group setting, perform
the following operation.
To change a group name:
Select a group on the [Group setting] screen,
press [Change] and rename the group.
To delete a setting:
Select a group on the [Group setting] screen,
press [Delete].
● The groups set here are also used with the
following settings.
[Selected group] for [Shared folder setting],
[Account record list] (only on the RISO
Console), and [Group] for [User setting]
ComColor Series Administrator's Guide 08