Table of Contents
Advertisement
QX STAND MODES
Mobile Mode - Normal (default)* Scanning this
bar code will enable the scanner to enter mobile
mode. It will always be in manual trigger mode
even when placed in the stand or cradle.
*Scanner Factory Reset returns to Mobile Mode.
#FNB 41FBA50000#
Auto Mode (Presentation Mode)
Scanning this bar code will enable the scanner
to enter auto mode. When the scanner is in auto
mode, it will switch to presentation trigger mode
when it detects power on the cradle pins. When
the scanner is removed from the cradle it will re-
main in presentation trigger mode until the users
presses the trigger. At that point it will switch to
normal manual trigger mode. Auto Mode command
barcode is also printed on the product label.
#FNB 41FBA50003#
8
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • +49 9401 9333-0 • info@ime.de • www.ime.de
QX Stand Modes
www.ime.de
Advertisement
Table of Contents
