Ec Declaration Of Conformity; Ukca Declaration Of Conformity - Stihl KM 111 R Instruction Manual

22 EC Declaration of Conformity

STIHL products must not be thrown in the gar‐
bage can. Take the product, accessories and
packaging to an approved disposal site for envi‐
ronment-friendly recycling.
Contact your STIHL servicing dealer for the lat‐
est information on waste disposal.
22 EC Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation:
Make:
Series:
Displacement:
KM 111 R
KM 131, KM 131 R
Serial identification number: 4180
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC and 2014/30/EU and
has been developed and manufactured in com‐
pliance with the following standards in the ver‐
sions valid on the date of production:
EN ISO 12100, EN 55012, EN 61000‑6‑1 (in
conjunction with the specified KombiTools
BF‑KM, BG‑KM, FCB‑KM, RG-KM, FCS‑KM,
FH‑KM, FS‑KM, HL‑KM, HT‑KM, KB‑KM and
KW‑KM)
The KombiEngine described here may be oper‐
ated only in conjunction with the KombiTools
approved by STIHL for use with this KombiEn‐
gine.
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
Produktzulassung
0458-436-0121-B
KombiEngine
STIHL
KM 111 R
KM 131
KM 131 R
3
31.4 cm
3
36.3 cm
The year of manufacture and serial number are
applied to the product.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
23 UKCA Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
Designation:
Make:
Series:
Displacement:
KM 111 R
KM 131, KM 131 R
Serial identification number: 4180
complies with the relevant provisions of the UK
regulations The Restriction of the Use of Certain
Hazardous Substances in Electrical and Elec‐
tronic Equipment Regulations 2012, Supply of
Machinery (Safety) Regulations 2008, and Elec‐
tromagnetic Compatibility Regulations 2016 and
has been developed and manufactured in
accordance with the versions of the following
standards valid on the date of manufacture:
EN ISO 12100, EN 55012, EN 61000‑6‑1 (in
conjunction with the specified KombiTools
BF‑KM, BG‑KM, FCB‑KM, RG-KM, FCS‑KM,
FH‑KM, FS‑KM, HL‑KM, HT‑KM, KB‑KM and
KW‑KM)
The KombiEngine described here may be oper‐
ated only in conjunction with the KombiTools
approved by STIHL for use with this KombiEn‐
gine.
English
KombiEngine
STIHL
KM 111 R
KM 131
KM 131 R
3
31.4 cm
3
36.3 cm
21