Maintenance And Repairs; Disposal; Ec Declaration Of Conformity - Stihl KombiEngine ECOSPEED KM 94 R Instruction Manual

English

19 Maintenance and Repairs

Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).

20 Disposal

Observe all country-specific waste disposal rules
and regulations.
STIHL products must not be thrown in the gar‐
bage can. Take the product, accessories and
packaging to an approved disposal site for envi‐
ronment-friendly recycling.
Contact your STIHL servicing dealer for the lat‐
est information on waste disposal.
21 EC Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
18
19 Maintenance and Repairs
Germany
declare under our sole responsibility that
Designation:
Make:
Series:
Serial identification number: 4149
Displacement
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC and 2014/30/EU and
has been developed and manufactured in com‐
pliance with the following standards in the ver‐
sions valid on the date of production:
EN ISO 12100, EN 55012, EN 61000‑6‑1 (in
conjunction with the following KombiTools:
BF‑KM, BG‑KM, FCB‑KM, FCS‑KM, FH‑KM,
FS‑KM, FSB‑KM, RG-KM, HL‑KM, HT‑KM,
KB‑KM, KW‑KM and SP-KM).
The KombiEngine described here may be oper‐
ated only in conjunction with the KombiTools
approved by STIHL for use with this KombiEn‐
gine.
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
Produktzulassung
The year of manufacture and serial number are
applied to the product.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
KombiEngine
STIHL
KM 94 RC-E
3
24.1cm
0458-467-8321-C