Download Print this page

Specification - Sealey CH30110VS Manual

1.2/2.4kw ceramic heater with telescopic tripod stand - 110v

Advertisement

DO NOT use the heater with a programmer, timer or any other device that switches the heater on automatically.
8
DO NOT touch the lamps, even when cold.
8
DO NOT use the heater without the wheels fitted and locked.
8
DO NOT allow children to touch or to operate the heater.
8
DO NOT locate the heater below an electrical socket outlet.
8
DO NOT use the heater without the grille fitted.
8
DO NOT use the heater out of doors. These heaters are designed for indoor use only.
8
DO NOT use this heater if it has been dropped.
8
DO NOT use if there are visible signs of damage to the heater.
8
DO NOT cover heater when in use, and do not obstruct the air inlet and outlet grilles.
8
DO NOT place heater too close to yourself or any object, allow the air to circulate freely.
8
DO NOT touch the outlet grille of the heater during and immediately after use as it will be hot.
8
Children of less than 3 years should be kept away unless continuously supervised.
9
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in
9
its intended normal operating position and they have been given supervision or instruction concerning the use of the appliance in a safe
way and understand the hazards involved. Children aged from 3 years to less than 8 shall not plug in, regulate and clean the appliance or
perform user maintenance.
This appliance can be used by children aged from 8 years and above and persons with physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision
2. INTRODUCTION
Tripod mounted powder coated metal construction. Adjustable thermostat control (15°C – 45°C). Soft-touch control panel with LED display. Programmable
7-day timer function. Equipped with a tilt cutout switch for added safety. Two ceramic heating elements provide instant heat when required. Polished
reflectors to maximize heat emission. Supplied with 2m cable fitted with 32A/110V plug. Foldable legs for easy storage.

3. SPECIFICATION

Model no .............................................................CH30110VS
Max. height .............................................................. 1760mm
Min. height ............................................................... 1500mm
Power .................................................................1200/2400W
Supply ...................................................................110V - 32A
Dimensions (WxDxH) ................. Heater: 395 x 190 x 413mm
22, 23, 24 See P/List
fig.2
4. ASSEMBLY
4.1.
Remove contents from packaging and check against list. In the unlikely event of missing or damaged parts contact your Sealey
stockist immediately.
4.2.
Fit adaptor [item 12] to heater swivel bracket [item 14] with M8 hexagon head screw, washer and hexagon stiff nut (items 22, 23, 24 in
fig.2). Torque screw to obtain grip without clamping the heater bracket totally. The heater angle can be adjusted about this
fixing between constraints.
4.3.
The tripod will be supplied assembled. Retract plunger (fig.1) and pull or push central column tube through sleeve until the
plunger "clicks" into the location hole. This will be the stands maximum height setting.
4.4.
Slide the handle down the central column and fix with the thumb screw through the M8 hole.
4.5.
Slide adaptor c/w heater into central column to full depth and clamp with thumb screw.
© Jack Sealey Limited
13 See P/List
fig.3
Original Language Version
fig.1
On
Off
Plunger
CH30110VS Issue:1 28/07/21

Advertisement

loading