Download Print this page

Specification - Sealey IR20.V4 Manual

Infrared paraffin / kerosene / diesel heater

Advertisement

do not obstruct the air inlet (rear) and air outlet (front) of the heater and do not use duct work in front or at the rear of the heater.
8
do not allow children or animals near the heater when in use, or whilst still hot.
8
WarninG! RISK oF eleCTRIC SHoCK. do not expose the heater to water spray, rain, dripping water or wind.
do not operate the heater when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
do not touch the heater outlet or cone when in use, or for a period of time after it's switched off, as these are VeRY hot and will
8
take time to cool down.
do not switch the heater off by disconnecting it from the mains. ALWAYS set the switch on the burner to the 'OFF' position and
8
allow the cooling cycle to finish, before disconnecting from the mains.
do not use an external fuel tank. Only use the tank that is fitted to the heater, and only fill it when the heater has cooled down.
8
ensure that the heater is correctly turned off
9
When not in use for an extended period, store in a safe, dry area, out of reach of children.
9
note: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
2. introduCtion
Infrared heater suitable for well ventilated applications. Clean burning unit operates on paraffin, kerosene or diesel. 15ltr Tank allows approximately
10hrs running time, making this unit extremely economical. Complies with rigorous standards and is fitted with a safety cut-out. Optional trolley
available for easy manoeuvrability, Model No. IR20T.

3. speCifiCation

model no ................................................................... ir20.V4
output ........................................................................ 20.5kW
output ................................................................70,000Btu/hr
Tank Capacity ............................................................... 15ltrs
Fuel .................................................Paraffin/Kerosene/Diesel
Supply .................................................................... 230V - 3A
Running Time per Filling (maximum) ...............................10hr
Transport Wheels .............................................................. no
Automatic Shut-Off ........................................................... Yes
Heated Area .............................................................14,000ft
Heated Area .................................................................396m
optional Trolley model no.: .......................................... ir20t
4. asseMbly
4.1.
Unpack the heater and check contents. Should there be any
damaged or missing parts contact your Sealey stockist immediately.
4.2.
Attach handle by lining up the holes in the handle with the holes in
the upper shell of the heater (fig.1).
4.3.
Insert screws and tighten.
4.4.
Remove heater and packaging material from the carton.
© Jack Sealey limited
3
3
Original Language Version
fig.2
IR20.V4 Issue 5 (ERP) 18/09/19
fig.1

Advertisement

loading

This manual is also suitable for:

Ir20