Advertisement
DO NOT place heater too close to yourself or any object, allow the air to circulate freely.
8
DO NOT touch the outlet grille of the heater during and immediately after use as it will be hot.
8
DO NOT use if this heater has been dropped.
8
DO NOT use if there are visible signs of damage to the heater.
8
1.3.
OPERATIONAL PRECAUTIONS
Use this heater on a horizontal and stable surface, or fix it to a wall as applicable.
9
WARNING! DO NOT use this heater in small rooms when they are occupied by persons not capable of leaving the room on their
‰
own, unless constant supervision is provided
WARNING! To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1m from the air outlet."
‰
The heater must only be used by people who have read these instructions and have been trained in its use.
9
DO NOT obstruct the air inlet and outlet sections of the heater.
8
DO NOT touch the heater casing or grille when first switched off, as these will be very hot and will take time to cool.
8
Children of less than 3 years should be kept away unless continuously supervised.
9
Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
8
CAUTION some parts of this product can become very hot and cause burns. Particular attention has to be given where children
and vulnerable people are present.
2.
INTRODUCTION
Electric fan heaters with ducting for industrial applications. Model No. DEH2001 features one heat setting, Model Nos. DEH3001,
DEH5001 and DEH10001 feature two heat settings. All units have thermostat control and fan only options. A totally dry heat with no
condensation, no gas, no fumes and no smell. Ideal for workshops and garages. Model No. DEH2001 is supplied with 6m ducting
hose, power cable and 3-pin plug. Model No DEH3001 is supplied with 6m ducting hose and power cable. DEH5001 is supplied with
6m ducting hose, 3ph power cable and 16A plug. DEH10001 is supplied with 6m ducting hose, 3ph power cable and 32A plug.
3.
SPECIFICATION
Model No: ..........................DEH2001 ........................... DEH3001 ........................... DEH5001 .............................. DEH10001
Power: ....................................2000W ...................... 1500/3000W .......................2500/5000W ......................... 5000/10000W
Supply: ............................ 230V - 13A .........................230V - 16A .................. 415V/3ph - 16A ....................... 415V/3ph - 32A
Airflow: ................................. 320m³/h ............................. 348m³/h ..............................739m³/h .................................1063m³/h
Size (WxDxH): ...310 x 210 x 340mm ........... 310 x 210 x 340mm ............400 x 240 x 360mm ................ 440 x 300 x 430mm
Plug Type: ........................... 3-Pin BS ...........................Bare Wire ................. Red - 16A-4P+E ......................Red - 32A-4P+E
Power Supply Cable Length: ..... 1.2m ...................................1.4m ................................... 1.2m ........................................1.2m
4.
CONNECTION (DEH10001)
4.1.
CONNECTING DEH10001 TO MAINS SUPPLY see fig.1
4.1.1.
The DEH10001 heater is supplied with a protected 5 pin connector mounted on the side of the control housing. In order to connect
to the mains it will be necessary to have the extension cable shown in fig.1 made up by a qualified electrician. (This connector is
not supplied with the machine.) The cable should be no shorter than 1.8m and no longer than 3m.
4.1.2.
Before connecting the DEH10001 to the mains ensure that the selector switch is set to OFF and the thermostat is set at minimum.
4.1.3.
Hold open the protective cover on the socket connector on the extension lead as shown above and present it to the heater
connector in the correct orientation so that the spigot on the heater connector passes into the keyway on the socket connector.
Push the socket connector fully home.
4.1.4.
Connect the other end of the extension cable to the mains supply.
5.
OPERATION REFER TO FIG.2
Off
Fan
Full Power
5.1.
Position the fan heater so that it stands upright on a firm surface and at a safe distance from wet environments and flammable objects.
WARNING! Always allow elements to cool before moving the units. Use only on a smooth even surface.
‰
5.2.
Connect the fan heater to the mains (see section 4 for DEH10001).
5.3.
Set the thermostat knob to the MAX and let the heater operate at full power.
© Jack Sealey Limited
Original Language Version
fig.1
Off
Fan
DEH2001.V2, DEH3001.V2, DEH5001.V2, DEH10001.V2
Half Power
Full Power
Issue 3 (1,F)
fig.2
07/11/23
Advertisement
