Download Print this page

Specification - Sealey AB1008.V3 Instructions Manual

Space warmer paraffin/kerosene/diesel heater

Advertisement

warninG! risK of electric sHocK. do not expose the heater to water spray, rain, dripping water or wind.
do not operate the heater when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
do not touch the heater outlet or dome when first switched off as these are very hot and will take time to cool.
8
do not unplug the heater to switch it off. Use the ON/OFF switch.
8
ensure that the heater is correctly turned off when not in use. store in a safe, dry area, with the fuel tank empty out of reach of
9
children.
note: this appliance is not intended for persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. children should be supervised to ensure that they do not play with the appliance.
2. introduction
our range of paraffin / kerosene / diesel heaters represents excellent value. Workshop tried and tested. All models have an adjustable thermostat
(c°) that cuts in as desired temperature is reached. models are fitted with digital room temperature (c°) display, spare parts storage compartment and
heavy duty solid wheels. Proven pump systems handle either paraffin, kerosene or diesel with no adjustment of air compressor required. All models are
fitted with fuel tank gauge and heavy-duty filler cap.
sealey advantages
• PARAFFIN, KEROSENE OR DIESEL - The Sealey AB heaters will operate on all.
• CLEAN BURNING - A specially designed burner head in a stainless steel combustion chamber ensures a more thorough burn of fuel
which means greater fuel economy and maximum heating effect.
• FILTER PROTECTION - The compressor unit is protected by extra large filter elements.
• LARGE FUEL TANK - The AB series heaters will operate for between 8 and 11 hours on a single fill of fuel.
• SAFETY FEATURES - The AB series heaters are fitted with a flame-out device which cuts the fuel supply when the flame is
inadvertently extinguished.
• QUALITY - Manufactured to comply with the rigorous standards.
• AFTER SALES SERVICE - The best after sales service in the business. Full spares back up for all models.
3.

specification

model no
aB1008
output
29.3kW/
100,000Btu/hr
tank capacity
38ltr
fuel
Paraffin/Kerosene/
diesel
supply
230V - 5A
running time per
11hr
filling
(maximum)
transport wheels
Yes
Airflow
520cfm
Automatic shut off
Yes
Heated area
20,000ft³/566mtr³
Weight
24.5kg
4. assemBlY
s
4.1.
slide axle through wheel support frame, slide a bushing and flat
washer (A) to each end of the axle.
4.2.
install wheels with valve stem on the outside, slide flat washer
(B) onto the axle and then using a cotter pin bend the legs of
the pin with pliers to secure. snap on the wheel caps onto the
flat washer (B).
4.3.
Place heater on wheel support frame ensuring that the air inlet
is by the wheels and place the heater onto the frame lining up
the holes on the fuel tank flange with holes on the wheel
support frame.
4.4.
Place handle on fuel tank flange and line up with the wheel
support frame fixing holes. insert bolts through the fuel tank
flange and both frames and secure finger tight only with nuts
and washers.
4.5.
repeat with process with the rear handle.
4.6.
Attach the cord wraps onto the front and rear handles as shown
in fig.1 using screws and nuts.
4.7.
When assembly is complete, securely tighten all nuts.
warninG! do not use the heater without the support
frame fully assembled.
© Jack sealey limited
aB1258
aB1758
36.6kW/
51.3kW/
125,000Btu/hr
175,000Btu/hr
38ltr
49ltr
Paraffin/Kerosene/
Paraffin/Kerosene/
diesel
diesel
230V - 5A
230V - 5A
10hr
9.5hr
Yes
Yes
540cfm
630cfm
Yes
Yes
24,800ft³/702mtr³
34,400ft³/974mtr³
24.5kg
27.7kg
Original Language Version
1
1
2
1
1
2
2
4
2
2
4
8
8
AB1008.V3, AB1258.V3, AB1758.V3| Issue:1 11/08/17
contents
Wheel Support Frame
Axle
Wheels
front Handle
rear Handle
Cord Wraps
cotter Pins
Axle Flat Washers
Axle Bushings
Wheel Caps
Cord Wrap Screws
Frame Bolts
frame nuts
fig.1

Advertisement

loading

This manual is also suitable for:

Ab1258.v3Ab1758.v3