Wpa-Psk With Tkip - Honeywell RP2 User Manual

6. After updating the new values, ensure that the Include column checkbox is
7. Allow 30 seconds for the printer to reset.

WPA-PSK with TKIP

1. Open the NETira CT Printer Configuration Utility Tool and click on Tools -
2. Under Printer Information, click on WIFI.
3. Click on WPA/WPA2.
4. Change (or confirm) the following parameter settings:
5. In the WPA_PSK_TKIP/WPA2_PSK settings area, enter a new Pass Phrase.
6. After updating the new values, ensure that the Include column checkbox is
7. Allow 30 seconds for the printer to reset.
24
selected for the values, and click the Send button to send this change to the
printer.
Query Printer Configuration (or press CTRL-q) to query the printer.
• Group Cipher: TKIP
• Network Authentication Type: WPA-PSK_TKIP
selected for the values, and click the Send button to send this change to the
printer.
RP2/RP4 User Guide